System S15a Reveal Edge
System S15a Reveal Edge
OWAconstruct Butt-cut Ceiling Grid
Fire Protection without compromise
With more than 7000 sections and accessories available, OWAconstruct suspension systems will provide for all your ceiling suspension requirements: Fire protection, security, accessibility, aesthetics, and much more. Made of galvanised steel, our exposed grid face is one of the toughest in the industry. OWAconstruct Butt-cut exposed grid system can be used in conjunction with OWAcoustic mineral fibre ceiling panels and Vinyl-faced gypsum ceiling panels
BENEFITS OF OWA System S15a Reveal Edge
Clean Lines
Noise reduction coefficients (NRC) of up to 0.90 provide superior acoustic qualities that help create an optimum working environment.
Fire Rated
OWAconstruct provides a complete fire-rated ceiling system. (panels, grid, etc.)
Strong as Steel
We use a steel capping which makes it a hardy grid that is very difficult to bend and damage. The grid lasts longer under extreme conditions.
Value for Money
OWAconstruct ceiling grid is competitively priced with all the benefits you have come to expect from OWA.
Technical Data
|
|
||
Product line |
OWAconstruct® Premium |
|
Dimensions |
600 x 600 mm600 x 1200 mmOther sizes available on request. |
|
Edge detail |
|
|
Metal suspension |
All sections are zinc galvanized and exposed faces white painted.For further details please contact us |
|
Suspension depth |
Minimum suspension depth 75 – 100 mm (from underside of soffit).For ease of panel removal 120 mm recommended. |
|
Fire protection* |
Fire protection: See OWA brochure No. 500 |
|
Suspension system |
|
|
Cross section: |
|
|
Section dimensions: |
|
No. 45/15, 46/15, 47/15 and 48/15 |
Construction |
|
The cross tees have a connection tab at each end, 2 cross tee sections are inserted into each slot in the main tee section but care must be taken to insert the tabs so that the tees are in correct alignment. The ends of the main tee sections have offset connectors which will lock positively when engaged |
Wall perimeters |
|
|
Installation examples |
 |
|
