Soudaseal High Tack
Soudaseal High Tack
Soudaseal HT is a high quality single component adhesive sealant with high adhesive strength and initial tack. It is based on MS-Polymer®, chemically neutral and fully elastic. For use in construction, automotive, marine and aerospace areas where a tough flexible rubber or adhesive with powerful bond strength is required.
Technical data sheet
Declaration of Performance
- High initial tack reducing the need for initial support
- High bond strength and fast cure onto nearly all surfaces
- Primerless adhesion even on damp surfaces (due to Soudaseal HT’s
unique adhesion promoters)
- High performance mechanical properties
- Flexible elastic rubber – movement accommodation up to 20 %
- Straight forward application even in adverse conditions
- No bubble formation within sealant (in high temperature and humidity
applications)
- Very easy to tool and finish
- Good extrudability even at low temperatures
- Colour stable and UV resistant
- Ecological advantages – free of isocyanates, solvents, halogens and
acids
- Does not contain isocyanates and silicone
- Solvent free and completely neutral – minimal health and safety
considerations
- Can be painted with all water based paints and many other systems
- Resistance to many chemicals and withstands mould growth
- No staining of porous materials such as natural stone, blue stone,
marble, granite
- High bond strength and fast cure onto nearly all surfaces
- Primerless adhesion even on damp surfaces (due to Soudaseal HT’s
unique adhesion promoters)
- High performance mechanical properties
- Flexible elastic rubber – movement accommodation up to 20 %
- Straight forward application even in adverse conditions
- No bubble formation within sealant (in high temperature and humidity
applications)
- Very easy to tool and finish
- Good extrudability even at low temperatures
- Colour stable and UV resistant
- Ecological advantages – free of isocyanates, solvents, halogens and
acids
- Does not contain isocyanates and silicone
- Solvent free and completely neutral – minimal health and safety
considerations
- Can be painted with all water based paints and many other systems
- Resistance to many chemicals and withstands mould growth
- No staining of porous materials such as natural stone, blue stone,
marble, granite
- Sealing and bonding in the building industry
- Sealing of floor joints and low movement wall joints
- Suitable for sanitary applications
- Structural bonding in vibrating constructions
- Connection joints in sheet metal fabrication
- Paintable gap filler and sealant
- Mirror bonding direct onto the back of the mirror
- Sealing of floor joints and low movement wall joints
- Suitable for sanitary applications
- Structural bonding in vibrating constructions
- Connection joints in sheet metal fabrication
- Paintable gap filler and sealant
- Mirror bonding direct onto the back of the mirror
Method: Manual- or pneumatic caulking gun
Application temperature: +1°C until +30°C
Cleaning: White Spirit or Surface Cleaner immediately after application and before curing
Tooling: soapy solution before skin formation
Repair with: Soudaseal HT
Application temperature: +1°C until +30°C
Cleaning: White Spirit or Surface Cleaner immediately after application and before curing
Tooling: soapy solution before skin formation
Repair with: Soudaseal HT
- Soudaseal HT may be overpainted with water based paints, however due
to the large number of paints and varnishes available we strongly
suggest a compatibility test before application. The drying time of
alkyd resin based paints may increase.
- Soudaseal HT can be applied to a wide variety of substrates. Due to
the fact that specific substrates such as plastics, polycarbonate,
etc, may differ from manufacturer to manufacturer, we recommend
preliminary compatibility tests.
to the large number of paints and varnishes available we strongly
suggest a compatibility test before application. The drying time of
alkyd resin based paints may increase.
- Soudaseal HT can be applied to a wide variety of substrates. Due to
the fact that specific substrates such as plastics, polycarbonate,
etc, may differ from manufacturer to manufacturer, we recommend
preliminary compatibility tests.