Multibond MS35
Multibond MS35
Multibond MS35 is a high quality, neutral, elastic, one component adehesive sealant based on SMX Polymer.
Technical data sheet
Declaration of Performance
- Good extrudability
- Stays elastic after curing and very sustainable
- Excellent adhesion on nearly all surfaces, even if slightly moist.
- Can be painted with water based systems
- No odour.
- Does not contain solvents, isocyanates, acids, halogens and toxic components, completely neutral.
- Good colour stability, weather and UV resistance
- Stays elastic after curing and very sustainable
- Excellent adhesion on nearly all surfaces, even if slightly moist.
- Can be painted with water based systems
- No odour.
- Does not contain solvents, isocyanates, acids, halogens and toxic components, completely neutral.
- Good colour stability, weather and UV resistance
- Sealing and bonding in the building and construction industry.
- Strong elastic bonding in vibrating constructions.
- Strong elastic bonding in vibrating constructions.
Application method: With manual- or pneumatic caulking gun.
Cleaning: With Fix ALL Cleaner immediately after use.
Finishing: With a soapy solution or Soudal
Finishing Solution before skinning.
Repair: With the same material
Cleaning: With Fix ALL Cleaner immediately after use.
Finishing: With a soapy solution or Soudal
Finishing Solution before skinning.
Repair: With the same material
- Multibond MS35 may be overpainted with water based paints, however due to the large number of paints and varnishes available we strongly suggest a compatibility test before application.
- The drying time of alkyd resin based paints may increase.
- Multibond MS35 can be applied to a wide variety of substrates. Due to the fact that specific substrates such as plastics, like polycarbonate, etc, may differ from manufacturer to manufacturer, we recommend preliminary compatibilty test.
- Multibond MS35 can not be used as a glazing sealant.
- The drying time of alkyd resin based paints may increase.
- Multibond MS35 can be applied to a wide variety of substrates. Due to the fact that specific substrates such as plastics, like polycarbonate, etc, may differ from manufacturer to manufacturer, we recommend preliminary compatibilty test.
- Multibond MS35 can not be used as a glazing sealant.