Soudabond Easy Gun
Soudabond Easy Gun
SOUDABOND EASY is a ready-to-use, single component, self-expanding polyurethane adhesive for clean, efficient and economical permanent bonding of insulation panels and plasterboard in building and construction.
- Cuts working time by up to 30%.
- Excellent initial bond, even at low temperatures.
- Economical in use due to precise application.
- One can covers up to 12 m² of insulation.
- Suitable for vertical applications.
- Can be applied at temperatures between -5 °C and +35 °C.
- Thermal conductivity 0.035 W/m.K enhances performance of insulation panels when filling gaps.
- Remains flexible, does not become brittle.
- Levels uneven surfaces.
- Limited post expansion for fast and precise installation of insulation panels and plasterboard.
- Substantial space and weight savings compared to conventional PU roof adhesives, bonding mortars, etc.
- Fast curing, work can continue about 1 hour after application.
- Solvent-free.
- Resistant to a variety of solvents, paints and chemicals.
- Does not age or rot, mould and mildew resistant, but not UV resistant.
- Water resistant (not watertight).
- Building material class B2 according to DIN 4102, part 1.
- Excellent initial bond, even at low temperatures.
- Economical in use due to precise application.
- One can covers up to 12 m² of insulation.
- Suitable for vertical applications.
- Can be applied at temperatures between -5 °C and +35 °C.
- Thermal conductivity 0.035 W/m.K enhances performance of insulation panels when filling gaps.
- Remains flexible, does not become brittle.
- Levels uneven surfaces.
- Limited post expansion for fast and precise installation of insulation panels and plasterboard.
- Substantial space and weight savings compared to conventional PU roof adhesives, bonding mortars, etc.
- Fast curing, work can continue about 1 hour after application.
- Solvent-free.
- Resistant to a variety of solvents, paints and chemicals.
- Does not age or rot, mould and mildew resistant, but not UV resistant.
- Water resistant (not watertight).
- Building material class B2 according to DIN 4102, part 1.
- Clean, efficient and economical permanent bonding of insulation panels.
- Suitable for bonding polystyrene (EPS + XPS), polyurethane (PUR/PIR) and phenol resin foam based insulation panels for flat roofs, perimeters,
facades, insulation/drain elements, cellar ceilings, internal insulation, etc.
- Suitable for bonding gypsum plasterboard/gypsum fiberboard in dry lining applications.
- Suitable for bonding non-load bearing walls, e.g. partition walls, screen walls, cellar bars, stone shelves, etc., of concrete precision blocks (aerated concrete, sand-lime brick, gypsum,...).
- Fills cavities between individual thermal insulation panels.
- Suitable for bonding polystyrene (EPS + XPS), polyurethane (PUR/PIR) and phenol resin foam based insulation panels for flat roofs, perimeters,
facades, insulation/drain elements, cellar ceilings, internal insulation, etc.
- Suitable for bonding gypsum plasterboard/gypsum fiberboard in dry lining applications.
- Suitable for bonding non-load bearing walls, e.g. partition walls, screen walls, cellar bars, stone shelves, etc., of concrete precision blocks (aerated concrete, sand-lime brick, gypsum,...).
- Fills cavities between individual thermal insulation panels.